INVESTMENT POWDER
GOLD STAR RESINCAST
A Premium Investment Powder for Resin/CAD casting, which has been tested and approved worldwide
RESINCAST was developed by GSP - tried and tested by jewellery manufacturers worldwide. It is designed primarily for investing and burnout of CAD/CAM rapid prototype resin and resin/wax patterns.
RESINCAST is an investment powder for CAD/CAM resin casting, offering the following benefits:
- Highest Quality raw materials sourced and graded for Resin/CAD casting
- Formulated with a greater green strength enabling it to withstand the high Resin/CAD expansion
- Can be used with any Resin/CAD manufacturer
- Clean cut surface finish, sharp edges, without inclusions
- Easy removal after casting, like your regular Gold Star investment powders
- Gold Star Resincast has a very high cristobalite content and is therefore able to withstand a top burnout temperature of 850°c (1562°f). This will ensure that it can withstand the additional expansion stresses upon the mould and also remove the carbons which can, in some cases, remain within the mould and affect the quality of the casting
- Resincast can also be used to produce injection wax castings and will easily cast all gold alloys
Use the arrow on the right for more information
GSP Quick-SpecMSDS
HEALTH AND SAFETY GUIDANCE FOR USING SILICA BASED PRODUCTS
GSP Quick-Spec
Product Selection
brass
silver
9ct-yellow
12ct-yellow
14ct-yellow
18ct-yellow
22ct-yellow
9ct-white (palladium)
14ct-white (palladium)
18ct-white (nickel)
18ct-white (palladium)
RP-Models
Omega+
Omega
Gem Set
XXX
Goldstar KB
XL